You know you need new rain gutters on your home, but you don’t know anything about rain gutter installation in Provo, and that means you don’t know what to ask when you call for estimates. Almost anyone can tell you about a neighbor’s house where the downspouts are located in a strange spot: zig zagging across the front of the house or pouring water on a driveway or sidewalk that becomes an icy nightmare in the winter. When you are installing rain gutters, your biggest advantage is simply caring about the quality of the final product.
Gutter Installation In Provo
Gutter installation in Provo isn’t rocket science. All you need to know is four simple things, and you should be able to have a new system that takes care of rain, snow, and ice melt efficiently for years.
First, what condition is your soffit and fascia in? If they are damaged or rotting, you need to replace them before you can install new rain gutter. You know the adage about putting a new patch on old fabric: take the time to make sure that the areas the gutter attaches to is solid.
Next, rain gutter works best with a little slope—not much is required, but you have to make sure that there’s a high point and slope down to where the downspout will be. In most cases, about ¼” for every 10 feet of rain gutter is sufficient to make sure the water runs the right direction. You also want a little lap where gutter pieces join. Although some installation instructions will say it is sufficient to simply caulk the join, if you really want these gutters to last for years, you should caulk, then lap them, then caulk them some more.
Finally, when looking at gutter installation in Provo, think carefully where you want your downspouts. Ideally, they empty into grass or a garden, but if you have to have them go where your driveway or sidewalk is, consider finding a way to place them under the concrete or channel them across the top, safely away from where they can cause an icy buildup.
Recent Comments